1953 Round 1 - South Pacific Road Racing Championships [Jan 15th]

Present

Question to those who have an NVidia card
I have a 1080 with a ryzen 2600x processor,
With RF2 on this track, but probably the others too, I have very important and random variations of fps and this, whatever the graphic settings in the game.
One moment I have 100fps with low latency and reasonable gpu usage, and the next I have 50fps with huge latency (+30) and 100% gpu usage! (In both cases I'm close to 0/5% cpu usage !)

No other game is a problem for me. AC for example runs almost everything at 100fps or more)

What are your settings ?

I had a 1030 until yesterday. I didn't have fps problems in HRRC last year even on tracks like Targa Florio, but of course was running everything on low/off. But for some reason at Gnoo Blas it was barely playable with very low fps even with everything on low/off. Even tried changing the resolution but didn't change anything. So I upgraded to a 1650.

For some reason this track is very fps hungry. Maybe it's a matter of compatibility with some smaller nVidia cards, as it happens sometimes. With the 1650 I can run the higher gfx game settings with no problem there.

j'ai dejà remarqué ça avec d'autres circuits sur RF2 !
Actuellement à l'epingle en bout de ligne droite, je me retrouve à 45fps avec une latence qui rend la conduite difficile...
Même en baissant les reglages, pas ou peu de changement.
Uitilises tu Nvidia inspector ?

Maintenant que je roule avec tout à fond à Gnoo Blas je vois où sont tous les objets, dont certains animés qui bouffent de la ressource. Je pense que le circuit est mal optimisé en low-res et que ces objets bien que non affichés avec tout au mini continuent de bouffer de la ressource. Car c'est là où j'avais les chutes de fps qu'ils se trouvent.

Non je ne connais pas nVidia inspector, désolé.

Et tu tournes à combien de fps environ ?
Si tu fais alt r, tu as la charge cpu/GPU ainsi que la latence

Là avec la 1650 c'est bon j'ai 300 fps partout. Mais avec la 1030 oui ça tombait à 40 avec des coups de latence de fou et des ressources cpu qui montaient en flèche. Et ce quelque soient les réglages

ah, oui !! j'ai clairement un problème car il n'y a qu'une génération d'écart et la 1080 est encore largement au dessus de la 1650...!
Tu as quel processeur ?
je vais continuer à tester mais ça va etre compliqué une fois sur le serveur avec du monde...

J'ai un i3 3.60GHz donc vraiment pas un cheval de course ^^

Ah, donc tout inférieur à moi !!
Je ne sais pas quoi modifier, dans l'épingle je suis au mieux à 70fps mais avec des chutes plus importantes par moment.
(J'affiche en 3440x1449, 100hz)

Christian Dauger wrote:

Question to those who have an NVidia card
I have a 1080 with a ryzen 2600x processor,
With RF2 on this track, but probably the others too, I have very important and random variations of fps and this, whatever the graphic settings in the game.
One moment I have 100fps with low latency and reasonable gpu usage, and the next I have 50fps with huge latency (+30) and 100% gpu usage! (In both cases I'm close to 0/5% cpu usage !)

No other game is a problem for me. AC for example runs almost everything at 100fps or more)

What are your settings ?

Hello Christian! I will post some suggested/recommended settings in (and out of) rFactor 2 that may help optimise performance, which I have gathered from participating in other series. I will hopefully post this later tonight, Canada time.

Present

Unfortunately I have a memorial service to attend on the 15th.
Have fun all. See you at the next event.

Christian Dauger wrote:

Question to those who have an NVidia card
I have a 1080 with a ryzen 2600x processor,
With RF2 on this track, but probably the others too, I have very important and random variations of fps and this, whatever the graphic settings in the game.
One moment I have 100fps with low latency and reasonable gpu usage, and the next I have 50fps with huge latency (+30) and 100% gpu usage! (In both cases I'm close to 0/5% cpu usage !)

No other game is a problem for me. AC for example runs almost everything at 100fps or more)

What are your settings ?

Hi Christian, as promised, please see this post:

Tips for Optimising rFactor 2 Performance]https://historicsimracing.forumotion.com/t4548-tips-for-optimising-rfactor-2-performance#bottom]Tips for Optimising rFactor 2 Performance

Jim Carvalho wrote:

Unfortunately I have a memorial service to attend on the 15th.
Have fun all. See you at the next event.

Sorry to hear this Jim! Look forward to seeing you at Round 2 hopefully.

Présent

Present.

Could someone who is close to the development of the mod tell me what the safe temperatures for the engine and brakes are?

Bruno Chacon wrote:

Could someone who is close to the development of the mod tell me what the safe temperatures for the engine and brakes are?

Hi Bruno,

I'm not that close to the development of the mod, but have done some trawling through discussion from a forum for another series where we raced these cars:

• Brake temps: safe under 600 degrees C
  
• Engine oil: under 115 degrees C
  
• The safe "rev limit" (with no rev limiter in these cars) is generally 6500-7000 rpm
  

Darren Andrews wrote:

Bruno Chacon wrote:

Could someone who is close to the development of the mod tell me what the safe temperatures for the engine and brakes are?

Hi Bruno,

I'm not that close to the development of the mod, but have done some trawling through discussion from a forum for another series where we raced these cars:

• Brake temps: safe under 600 degrees C
  
• Engine oil: under 115 degrees C
  
• The safe "rev limit" (with no rev limiter in these cars) is generally 6500-7000 rpm
  

Thank you very much Darren!

Present

present

Present

Present