It has come to our attention that the backstretch inside fence is non-collidable. Please download and apply this SCN update. Thank you
--> DOWNLOAD SCN UPDATE <--
Now that you mention SCN updates . . . . The apron for pit out isn't hardly as wide as the cars. It's gonna get really dicey trying to get back up to speed, pinned to the inside of the white line, while cars on track are coming by at 220mph trying to keep it pinned right on the same white line. Any relief with that?
Nope. The apron is what it is. Stay under the line until turn 2 exit. No exceptions.
Scott Urick Experienced Driver
Number of posts : 228 Age : 58 Location : Ohio Registration date : 2015-04-17
And since you are Johnny On The Spot with answers . . . . When setting up an off-line race weekend, is there any difference in opponent selection between "ROUND 09 - Michigan500" and "ROUND 09 - Michigan500 - Race"?
Jason White Racing Legend
Number of posts : 14725 Age : 47 Location : Ferndale, MI USA Registration date : 2011-12-25
And since you are Johnny On The Spot with answers . . . . When setting up an off-line race weekend, is there any difference in opponent selection between "ROUND 09 - Michigan500" and "ROUND 09 - Michigan500 - Race"?
Sabre would be the one to answer that question.
Richard Coxon Racing Legend
Number of posts : 16590 Age : 36 Location : Sheffield, England Registration date : 2012-06-29
When setting up an off-line race weekend, is there any difference in opponent selection between "ROUND 09 - Michigan500" and "ROUND 09 - Michigan500 - Race"?
I don't think that there is any difference as all of the cars that qualified also raced.
Raul Jereb Racing Legend
Number of posts : 1490 Age : 50 Location : Rijeka, Croatia Registration date : 2013-05-28
As I understood, stagr is aplied only to the right wheels of the car. But, in PIT MENU (in car) there is option to change all four wheels with stagr 9, 15, or none.. So Im confused, what should I choose, if Im using any stagr..
thank you
David Sabre Racing Legend
Number of posts : 5340 Age : 60 Location : england Registration date : 2012-02-25
As I understood, stagr is aplied only to the right wheels of the car. But, in PIT MENU (in car) there is option to change all four wheels with stagr 9, 15, or none.. So Im confused, what should I choose, if Im using any stagr..
thank you
Stagger is applied to the front wheels and rear wheels as a pair. You are setting the difference in tyre diameters on the left and right sides. The outside (right side) wheel will be a larger diameter, 0.09 or 0.15 of an inch. SW=SpeedWay compound, stagr=stagger, 0 0.09 or 0.15 is the tyre diameter difference left to right side.
Bob Holada Club Driver
Number of posts : 119 Age : 73 Location : Fort Wayne, Indiana Registration date : 2016-05-17
Stagger is applied to the front wheels and rear wheels as a pair. You are setting the difference in tyre diameters on the left and right sides. The outside (right side) wheel will be a larger diameter, 0.09 or 0.15 of an inch. SW=SpeedWay compound, stagr=stagger, 0 0.09 or 0.15 is the tyre diameter difference left to right side.
Ok, this is what I undestand, but, please, could you be more specific:
when in garage, I choose front and rear tyres stagr 15.
when on track, and I enter PIT MENU, i have now 4 tyres to choose, not only front and read. So, If i want to keep the original setup, what am I supposed to choose, since there is option for stagr 0-15 (and no change) for all four tyres.
grazie.
David Sabre Racing Legend
Number of posts : 5340 Age : 60 Location : england Registration date : 2012-02-25
Stagger is applied to the front wheels and rear wheels as a pair. You are setting the difference in tyre diameters on the left and right sides. The outside (right side) wheel will be a larger diameter, 0.09 or 0.15 of an inch. SW=SpeedWay compound, stagr=stagger, 0 0.09 or 0.15 is the tyre diameter difference left to right side.
Ok, this is what I undestand, but, please, could you be more specific:
when in garage, I choose front and rear tyres stagr 15.
when on track, and I enter PIT MENU, i have now 4 tyres to choose, not only front and read. So, If i want to keep the original setup, what am I supposed to choose, since there is option for stagr 0-15 (and no change) for all four tyres.
grazie.
What you are selecting in the PIT MENU is the tyre compound type, in this mod that is the stagger amount. If you want to stay on the same tyres that you started with there is no need to change anything in PIT MENU, you will stay on the same tyres. If you want to change to a different stagger than make sure that all compound types in PIT MENU are the same, all 4 tyres 0 for no stagger, all 4 tyres 0.09 for that stagger or all 4 tyres 0.15 for that stagger.
Raul Jereb Racing Legend
Number of posts : 1490 Age : 50 Location : Rijeka, Croatia Registration date : 2013-05-28
What you are selecting in the PIT MENU is the tyre compound type, in this mod that is the stagger amount. If you want to stay on the same tyres that you started with there is no need to change anything in PIT MENU, you will stay on the same tyres. If you want to change to a different stagger than make sure that all compound types in PIT MENU are the same, all 4 tyres 0 for no stagger, all 4 tyres 0.09 for that stagger or all 4 tyres 0.15 for that stagger.
I think we dont understand eachother
Its clear that if I dont want any change, ill schoose "no change".
If I choose all four tyres (in Pit menu) to be stagr15, is there going to be a difference between left and right ones? Isn't the purpose of the stagr to make those wheels different in radius?
Or, what Im missing is the fact that by choosing (in pit menu) all four tyres stagr15 Im applying that diference..
David Sabre Racing Legend
Number of posts : 5340 Age : 60 Location : england Registration date : 2012-02-25
What you are selecting in the PIT MENU is the tyre compound type, in this mod that is the stagger amount. If you want to stay on the same tyres that you started with there is no need to change anything in PIT MENU, you will stay on the same tyres. If you want to change to a different stagger than make sure that all compound types in PIT MENU are the same, all 4 tyres 0 for no stagger, all 4 tyres 0.09 for that stagger or all 4 tyres 0.15 for that stagger.
Or, what Im missing is the fact that by choosing (in pit menu) all four tyres stagr15 Im applying that diference..
Yes, that's it. To change to 0.09 stagger select all stagr0.09, etc.
Grant Riddall Experienced Driver
Number of posts : 313 Age : 34 Location : England Registration date : 2015-12-10
Hate to do this on short notice but things went nuclear at work and I'm gonna have to pull out. I'm working all day tomorrow and every Sunday from now on so racing won't be possible. Thanks for your understanding.
Simon Wattman Experienced Driver
Number of posts : 270 Age : 36 Location : Stockholm Registration date : 2012-01-22